DIY The Paving Walkway | How To DIY Concrete Paving With Paver Mould

Paving walkway DIY

Have you ever dreaming of having a paving walkway in your already beautiful garden? Well, you don’t have too spent to much of bucks to actually have it,of course, not outsource to the contractor ,but do it yourself. It is always fun to create your own unique walkway or patio using the paving mould. Some will suggest that it’s a heavy work, but the end result is something that looks gorgeous, provides a real enhancement to any home, and will last for years.

Why DIY Your Own Paver Walkway ?

Some may wonder why using a mold to make concrete pavers is better than buying ready-made pavers. Well, concrete paver mould is come with difference sizes and pattern, you can choose the pattern that you like. You can even add coloring agent into the cement or adding rocks, pebbles, or colored stones to make your paving walkway unique and interesting.

Unique Paver Walkway Using Paving Mould

DIY your own unique paving walkway

STEPS TO CREATE OWN PAVING WALKWAY

Step 1:
Decide which part of your garden for the paving walkway. A relatively level area is the easier area to work with. Then, clean the area according to walkway area and size. lay out your walkway. Use string and stakes to make your outline

Step 2:
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel. (Tips to mix the cement)

Step 3:
Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area. Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points

DIY Paving Walkway with Paving Mold

DIY Paving Walkway

Step 4:
Allow the concrete to set for a few minutes, then carefully remove the mold. For the next stretch, rotate the paving mold a quarter-turn and place it beside the paver just completed, angling slightly if you’re creating a curving pathway.

Step 5:
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around

Finally you’re done !
DIY Paving Walkway Using Paving Mold

 

WHERE TO BUY PAVING MOLD?
Checkout How MUch It Cost You in AMAZON.COM!!!

Customer review on this products

facebooktwittergoogle_plusredditpinterestlinkedinmail